Chicago Pneumatic CP7748TL-2 1/2" Impact Wrench Ext
This item has been discontinued and replaced with CP7748-2 (8941077486)
1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet
The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.Model CP7748TL-2 Part number 8941077485 Actual air consumption 10 l/s 22 cfm Air inlet thread size 1/4 " Average air consumption 2 1/2 l/s 5 1/2 cfm Blows per minute 850 Box dimensions 264*192*75 mm 10.4*7.6*3 " Clutch type Twin Hammer European Standards EN ISO 11148-6:2013 Free speed 8200 rpm Handle type Pistol Length 250 mm 9.8 " Maximum Torque (reverse) 1250 Nm 920 ft.lbs Min. hose size 10 mm 3/8 " Net weight 2.4 kg 5.3 lb Over carton 406*282*403 mm 16*11.1*15.9 " Power/weight ratio 520.8 Nm/kg 174 ft.lb/lb Side to center 38 mm 1 1/2 " Socket retainer Friction ring Sound Power 97 db(A) Sound pressure 86 db(A) Square drive 1/2 " Vibration 4.8 m/s² Vibration ISO ISO-28927-2 Vibration uncertainty (K) 1 1/2 m/s² Working Torque Range (fwd) 90 - 140 Nm 66 - 103 ft.lbs